Water Damage Restoration – A Brief Preview
It’s the procedure of repairing a home or property to its pre loss condition. Damage to the property might be due to an overflow, flood or any other water damage event. The water damage restoration process involves several key procedures like loss assessment, categorization on the basis of the water contamination levels, decontaminating and drying the structure, monitoring of the procedure and completion of the process. You can find two large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) and the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage because of water guide is the benchmark tool that is utilized by firms that specialize in restoration of water damage.
sewage cleanup Des Moines, IA
Loss Assessment and Categorization
Loss evaluation is the first and the most important step in water damage restoration. The assessment must be correct so an appropriate response may be taken. In restorating the damage due to water, technicians and the insurance companies must work together and know what is damaged and how exactly to start restoring the damage. Identifying the source of the damage, documentation of damage, and accurate estimates are mandatory for a proper water damage restoration. Categorization is on the basis of the contamination levels of the water source. The categories are listed below
Category 1 – This really is water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This really is water that’s some contaminants like water from a dishwasher, automatic washer or toilet with urine.
Category 3 – This really is water that is highly unsanitary and is capable of causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are some examples.
Decontamination and Drying
Following the evaluation is complete, the procedure of drying and decontaminating begins at the site. Based on the extent of damage, damage caused because of water may be classified into 4 types. Class 1 Damage- When loss is restricted to a tiny area and less water has been absorbed by materials. This results in slow evaporation rate. Class 2 Damage – When the damage would be to the whole room and carpet area. Class 3 Damage – When the whole area is saturated with water and Class 4 Damage – when there are lots of deep saturation pockets. Decontamination and drying is just a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments have to be used. Decontamination must be performed if contamination has been detected in the area. Decontamination may be performed for the entire area or in specific pockets where contamination has been detected.